DS-6 Audio Device

with eight parallel channels and up to 254 audio files The DS-6 Audio Device serves as a voice or tone memory within the decentralised, serverless DS-6 communication system. Up to 254 audio files, e.g. texts for announcements or tones for alarms, can be stored in a total of eight parallel channels in the DS-6 Audio Device and retrieved by any appropriately configured device in the DS-6 or TIMM network. The standard SD card used in the DS-6 Audio Device supports up to 240 min. audio capacity at a sample rate of 24 kHz. To ensure maximum flexibility, all eight cables share this memory. The audio output can be used both on microphone units in communication networks and via loudspeakers in pure public address systems. The audio files are stored inside the unit. The audio files can be transferred to the DS-6 Audio Device via the DS-6 network, or they can be discussed via a selected microphone unit in the DS-6 network. The DS-6 Audio Device has two Ethernet ports for redundant network configuration. Eight parallel channels can be used individually and without blocking Up to 254 audio files addressable Redundant network operation Up to 240 minutes recording capacity In the DS-6 network via TIMM Config or configurable at the unit via USB Audio files can be called up with any configured device in the DS-6 network or in a superordinate TIMM network Fault signal changeover contact Fuse monitoring Temperature monitoring Watchdog