DS-6 Up0-adapter

8 Ports for WFD U p0   The DS-6 U p0 -Adapter serves as an adapter or interface for the connection of digital U p0  stations to the decentralised communication system DS-6. A total of eight digital stations can be connected with cable lengths of up to 2 km without additional power supply. Two redundant 4-way switches are integrated in the DS-6 U p0 -Adapter to connect the eight U p0  subscribers to the DS-6 network. The UK p0 -Adapter as a single device forms a small network node for eight digital U p0  subscribers. In addition, each switch has four Ethernet ports for redundant network construction and redundant cascading of the devices. IP-adapter for digital call stations Serverless operation even with cascaded setup (with up to 6 U p0  adapters) Up to 8 digital call stations without additional power supplywith cable lengths of up to 2 km using 2-wire technology Two redundant switches to connect the 8 U p0  subscribers Four Ethernet ports for redundant network configuration and redundant cascading of devices Can be operated in DS-6 network and TIMM Fuse monitoring Temperature monitoring Watchdog 2 fault signal change-over contacts Operating mode can be configured separately for each component port Front panel contains 8x RJ45 LAN sockets, 2x USB service sockets and 16x U p0  status LEDs and 8x device status LEDs Rear panel contains 8x RJ45 U p0  sockets, 2 fault indication contacts, 9 fuses and the terminals for the power supply